Arduino Project

Reyax RYBG211_lite Bluetooth low energy module with Arduino.

Hello everyone, welcome to another post, In this article we will learn about Bluetooth Low Energy….in short BLE, and by using RYBG211_lite BLE module we will make a very interesting and useful home-automation project along with Arduino UNO and also I will test the range of this module.  In this home-automation project we can control […]

ESP32 Projects IOT Project

SMT 4 Node Smart HomeAutomation PCB.|ESP32

Hey hello friends welcome to another post, In this article, I am going to introduce my newly design fully SMT components used 4 channel remotely and manually controlled homeAutomation PCB. I have also made 8 channel SMT homeautomation PCB, TMT Components used homeautomation PCB. This homeautoamtion PCB is very small in size and compact which can […]

IOT Project

Internet and Manual Control HomeAutomation System with feedback using ESP32 & Blynk.

Hey hello friends , welcome to another post, In this article I will let you know how to make internet and manual control homeautomation system using blynk iot cloud platform. By using this homeautoamtion system you can control  your home appliances over internet from your smartphone from anywher in this world  as well as check the status […]

IOT Project

ESP32 Internet Controlled 10Ch HomeAutomation System Using Reyax MQTT Cloud.

In this Article, we will learn how to make our own homeautomation system using our own MQTT cloud broker & we will also learn about mqtt protocol. In this homeautomation System , we are able to control our home-appliances by an smartphone and monitor the real time status on the smartphone.  This project will work […]

Arduino Project GSM Project

8 Channel Home Automation using GSM Module SIM 900A

In this article, we will make GSM based Homeautomation system in which we control total 8 no. of Devices and We can also check the status of our devices either it is ON or OFF. This project is useful for remote location where internet connectivity is not available. By using GSM Module we can control […]

IOT Project Review

Bluetooth & Manual Controlled, 8 Node SMT Homeautomation PCB.

Hello friends, Welcome to another homeautoamtion project article, In this post we are going to make Android app bluetooth controlled homeautomation system. For making of this homeautomation system , I will use my 8 node SMT homeautomation pcb and coustom design android app. Best part of this project is that we don’t need any internet connection or any […]

IOT Project

ESP32 Bluetooth Controlled 10Ch HomeAutomation System Using Android App.

We all know ESP32 comes with WIFI, Bluetooth Low Energy and Bluetooth Classic, In this Homeautomation project, we are going to use ESP32 Bluetooth classic feature to control our homeappliances . Components Requried 1.ESP32 Board. 2.Relay (5volt). 3.IN4007 Diode. 4.BC547 NPN Transistor. 5.Two pin Terminal Connector. 6.Power Break (5volt).  7.Coustom Designed PCB. Coustom Made PCB. Although […]

Arduino Project

Heart Rate & Spo2 Monitor System Using MAX30100 & NodeMCU ESP8266.

In this project we will build a device that can measure Blood Oxygen Concentration & Heart Rate using MAX30100 Pulse Oximeter & NodeMCU. The blood Oxygen Concentration termed as SpO2 is measured in Percentage and Heart Beat/Pulse Rate is measured in BPM. The MAX30100 is a Pulse Oximetry and heart rate monitor sensor solution.We will display the […]

Arduino Project

EEPROM Memory,Android App and Manual Control Home Automation System.

Hello friends, In this article we are going to make Home Automation System which can be controlled with Smartphone as well as Manual Buttons. In this project we will be storing data in the EEPROM Memory of Arduino so when there is any power cutoff and when the power is back again it will continue […]

Back To Top